Welcome to Shenzhen Meiruike Electronic Technology Co., Ltd.
Message | About us | Chinese Tel:400-876-9388
CN
美瑞克电子

Category

X

RK2511AL DC Low Resistance Tester

X
  • RK2511AL DC low resistance

    Resistance Tester Product Introduction
    rk2511al/bl series adopts 0.8 inch high-brightness digital tube display, all english buttons and indicators, making the instrument display clearer and easier to operate the interface. fully automatic range test circuit, all electronic switch design, can be instantaneously completed from the highest range to the lowest range of switching. automatic sorting function as standard.

    Fields of application
    components: resistors, inductors, transformers, motors, circuit solder joints.
    cables, connectors: multi-stranded wires, connectors, various switches
    material: thermal material (fuse, sensor for electric heat regulator)
    new energy: electric vehicle battery pack connection bridge, battery cell connection resistance

    Performance characteristics
    ideal instrument for line testing
    easy to operate and maintain 4-digit display
    the sorting results are displayed
    super, bottom, pass sorting and signaling
    compare limits are set directly and displayed
     

  • model RK2511 AL RK2511 BL RK2511 ALR
    test
    resistance range
    0.01mΩ - 200.0KO 0.1mΩ-50.00KΩ 0.01mΩ-200.0KO
    test accuracy 50mΩ range 0.1% ± 5

    words, 500mΩ range 0.1% ± 3 words, 5Ω,

    5 0 Ω, 500Ω, 5KΩ range 0.1% ± 2 words, 50KΩ range 0.1% ±3, 20
    500mΩ Range 0.1% ±

    3 words, 5

    Ω, 50 Ω,

    500 Ω, 5KΩ Range 0.1%

    ± 2 words,
    3 50KΩ RANGE 0.1% ±
     
    50mΩ range 0.1% ± 5

    words, 500mΩ

    range 0.1%

    ±3 words, 5Ω, 5 0 Ω, 500Ω,

    5KΩ range 0.1% ± 2 words,

    50KΩ range 0.1% ±3, 20
    test the range 50mΩ 500mΩ 5Ω 50Ω

    500Ω 5 kΩ 50kΩ 200kΩ
    500mΩ 5Ω 50Ω

    500Ω 5kΩ 50kΩ
    50mΩ 500mΩ 5Ω 50Ω

    500Ω 5 kΩ 50kΩ 200kΩ
    resolution 10uΩ 100uΩ 1mΩ 10mΩ

    100mΩ 1Ω 10Ω 100
    100uΩ 1mΩ 10mΩ

    100mΩ 1Ω 10Ω
    10uΩ 100uΩ 1mΩ 10mΩ

    100mΩ 1Ω 10Ω 100
    speed slow 3 times/sec
    fast 10 times/sec
    measuring mode automatic, hold
    screen 0.8 inch four digit digital tube
    calibration short-circuit zero at full scale
    signal pass, pass, fail
    interface not HANDLER INTERFACE, RS2 32 INTERFACE
    test side four-terminal testing
    comparator sorting PASS DISPLAY IN(PASS)
    UNDER ULTRA-NON-CONFORMING DISPLAY LO(FAIL)-ON-OFF-FAIL DISPLAY HI (FAIL)
    operating temperature 0℃-40℃,≦ 75%RH
    power supply 100V-121V,198V-242V,47.5-63Hz
    fuse specification 0.5A250V1A110V SLOW MELT
    power consumption ≦15VA
    size 280mm× 97mm×217mm
    annex RK0000 POWER CORD, RK26004A FOUR-TERMINAL TEST FIXTURE RK0000 power cord, RK26004A four-terminal test fixture, RK00002HANDLER cable,

    RK00003 communication cable, host computer (standard)
    weight 2.2kg

  • model image type overview
    RK0000 POWER CORD standard the instrument comes standard with a national standard power cord and can be purchased separately.
    RK26004A FOUR-END TEST FIXTURE standard four-terminal test clips come standard and can be purchased separately.
    instructions