Welcome to Shenzhen Meiruike Electronic Technology Co., Ltd.
Message | About us | Chinese Tel:400-876-9388
CN
美瑞克电子

Category

X

RK2518-16 multiplex resistance tester

X
  • RK2518-16 multiplex resistance tester
     
    Product introduction
     
    RK2518-16 multi-channel resistance tester adopts the current mainstream 32bits CPU and high-density SMD mounting technology, 24 bit color resolution 480*272 true color IPS LCD LCD display, and up and down function keys, the interface is refreshing and easy to operate; It is used in relay contact resistance, connector resistance, wire resistance, printed circuit board line and solder hole resistance, etc.; temperature compensation can avoid the influence of environmental temperature on the test work; rk2518 series provides a variety of interface functions, which can facilitate data communication and remote control with PC.
     
    Application field
     
    It is widely used to measure the resistance of various coils, the resistance of motor transformer windings, the wire resistance of various cables, the contact resistance and metal riveting resistance of switch plugs, sockets and other electrical components, metal flaw detection, etc. it can use handler, USB and RS232 interfaces to output good / bad product signals for automatic testing.
     
    Performance characteristics
     
    1. The maximum resistance accuracy: 0.05%; the minimum resistance resolution: 10 μ Ω;
     
    2. Temperature compensation function (TC); basic temperature accuracy: 0.1 ℃;
     
    3. Maximum test range: 10 μ Ω ~ 200K Ω;
     
    4. Zero base design, weak resistance test without clearing;
     
    5. Single channel maximum test speed: 40 times / S;
     
    6. Third gear comparison function: pass / over upper limit / over lower limit;
     
    7. Multiple trigger modes: internal, external and manual;
     
    8. RS232C / handler / USB / RS485 interface realizes remote control;
     
    9. U disk can record test data and upgrade instrument software remotely.
  • Model RK2518-4 RK2518-8 RK2518-16
    Resistance measurement
    Measuring range 10μΩ~200KΩ
    Resistance range Basic accuracy 0.05%
    Number of scanning paths 4 way 8 way 16way
    Maximum test current 500mA
    Display
    Display 24 bit color, resolution 480 * 272 true color IPS LCD
    Reading digit Four and a half digit display
    Measurement function
    Resistance measurement time Fast speed: 40 times / s medium speed: 20 times / s slow speed: 12 times / S
    Test side configuration Four terminal
    Measurement mode Sequential scanning
    Save test parameters 5 groups
    Temperature measurement
    Measurement parameters PT1000: accuracy 0.1 ℃
    Display range -10℃-99.9℃
    Comparator
    Signal output HI/PASS/LO
    News ring Pass / fail / close
    Limit setting mode Absolute value upper / lower limit; percentage upper / lower limit + nominal value
    Other parameters
    Interface USB HOST/USB DEVICE/RS232/HANDLER/RS485
    Working environment Temperature 0 ℃~ 40 ℃ humidity < 80% RH
    Dimension 361×107×264mm
    Weight Net weight about 4kg
    Accessories Four terminal Kelvin test clip, temperature probe, USB / 232 communication cable, plug-in terminal, power line
     

  • Model Picture Type Overview
    RK25011D Standard The instrument is equipped with four terminal Kelvin test clip as standard, which can be purchased separately
    RK25018-16 Standard The instrument is equipped with plug-in terminals, which can be purchased separately
    RK30W1000A Standard The instrument is equipped with standard temperature probe, which can be purchased separately
    RK20K Standard The instrument is equipped with 232 communication cable, which can be purchased separately
    RK21K Standard The instrument is equipped with USB communication cable, which can be purchased separately
    RK00001 Standard The instrument is standard with national standard power cord, which can be purchased separately.
    Certificate warranty card Standard The operation manual of the instrument standard product.
    Factory calibration certificate    Standard The operation manual of the instrument standard product.
    Instructions    Standard The operation manual of the instrument standard product.
     

  • RK2518-16 multiplex resistance tester Click to download the instruction manual
  • Copyright © 2020 Shenzhen Meiruike Electronic Technology Co., Ltd., All Rights Reserved 粤ICP备07050961号-1 网站建设:深圳北易
    美瑞克电子
    美瑞克电子
    美瑞克电子

    Follow us

    美瑞克电子
    400-876-9388
    美瑞克电子